31
Manual Giga Connect Box
WiFi Network Name (SSID): Enter a user-friendly name to identify the wireless
network. This name is also referred to as the Service Set Identifier (SSID).
WiFi Network Name (SSID) broadcast: Choose whether you want to broadcast the
network name (SSID). If you choose Yes, the WiFi network name (SSID) will be visible
to all users in the area.
Security: Choose the security setting for the router.
WiFi Password (security key): Enter a password for your network.
Wireless MAC filtering: Use this setting if you want to allow or block devices based on
their MAC addresses. Click Disable to disable filtering. Click Allow if you only want to
permit the devices on the list to connect. Deny allows any device except those on the
list to connect.
Attached devices: Shows a list of the device that are attached to the wireless
network.
Add device: Use this section to add a new device to your wireless filter list. Enter the
Device name and MAC address, and specify whether you want to add the device to
the 2.4 GHz list, the 5 GHz list, or both lists. Click Add device when you are finished.
Wireless filter list: Shows a list of devices that have been marked for wireless MAC
filtering. After you make changes to this screen, be sure to click Apply changes.
