19
Manual Giga Connect Box
Follow these steps to connect and turn on your Giga Connect Box:
Connect one end of the coax cable to the cable outlet or splitter, and the other
end to the Giga Connect Box’s Cable connector. Tighten the connections by
hand, then tighten an additional 1/8 turn with a wrench.
Note: For best performance, use high-quality coax cable and minimize or
eliminate splitters between the cable jack and the Giga Connect Box.
Insert the plug from the power cord into the Power connector on the back of
the Giga Connect Box and insert the power cord into a convenient AC outlet.
Note: Use only the external AC power adapter (if provided) and power cord
included with the equipment.
The LED ring on the Giga Connect Box lights up, then pulses white and green
before appearing solid white. Refer to the LED tables shown in LED patterns on
the Giga Connect Box (page 24). See Troubleshooting if the LED ring does
not light up.
Connect one end of the Ethernet cable to any Ethernet port on the back of
the Giga Connect Box, and the other end to the Ethernet port on a computer,
Ethernet hub, or broadband router.
Note: If you are connecting to a computer, use the Ethernet cable included in
the Giga Connect Box package.
Connect one end of the telephone cable to the telephone port on the back of
the Giga Connect Box. Connect the other end to the telephone.
Move the power switch to the ON position.
1
2
3
4
5
