Unox ChefTop XVC 2005, Инструкция по эксплуатации

Страница: 67 / 80

Oven-user interface
The ovens show any alarm/warning messages regarding
WKHRYHQRULQVWDOOHGSHULSKHUDOVSURYHUVRUKRRGVRQ
their display screens.
7KHZDUQLQJPHVVDJHVWARNINGVLJQDOPDOIXQF
-
tions that nevertheless allow the appliance and pe-
ripherals to operate, though with a restricted set of
functions.
Pressing button clears the Warning list from
THE SCREEN.
- The alarm messages
$/$50 LGHQWLI\ VLWXDWLRQV
that fail to allow any appliance/peripheral operation
whatsoever, and therefore must be put into STOP
mode. If the alarm messages strictly refer to the pe-
ULSKHUDOVHJSURYHUVKRRGVHWFWKHRYHQFDQVWLOO
be used.
When there are several ALARM/WARNING MESSAGES, the user can scroll through these by repeatedly pressing
START/STOP.
Display Description Effect Troubleshooting
AF - OVEN ALARMS
AF01
Motor thermal alarm
The oven stops any operating
mode and blocks any screen display
configuration
Contact the Customer Assistance
Service
AF02
Safety thermostat alarm
AF03
Oven cavity alarm
AF04
Communications failure alarm
AF05
Communications failure with gas
board
AF06
Fume temperature in gas oven alarm
AF08
Motor tachometer
AF09
No/little water supply during wash
The oven stops any operating
mode and blocks any screen
display configuration. Turn the
oven's power on and off to
override the alarm and use the
DSSOLDQFHZLWKRXWXVHRIZDVKLQJ
Check the plumbing.
Once the water supply has been
restored, cut and restore power
to the oven and
promptly start a
washing cycle.
AF010
Incorrect CRC alarm in EEPROM
for essential parameters
The oven stops any operating
mode and blocks any screen display
configuration
Contact the Customer Assistance
Service
AF011
No 230 V power supply to the gas
board
AF012
No 230 V power supply to the
chicken cabinet
BakerTop
™
ChefTop
™
English
67