Unox ChefTop XVC 2005, Инструкция по эксплуатации

Страница: 47 / 80

Core probe positioning
OK
OK
During the cooking cycle, the probe detects the tem-
perature at the "core" of the product: it reaches the tem-
perature set by the user when the product is perfectly
cooked both on its surface and innermost portion.
The core probe must be poked deep into the food be-
ing cooked; make sure that the probe head reaches
the product's "core" - the innermost portion - without
piercing its way through. If the food you are cooking is
rather thin, insert the probe parallel to the oven tray.
When dealing with several foods, insert the probe into
the smallest product; take the product out of the oven
once it has reached the target temperature and move
the probe to the new smallest piece, thus starting the
F\FOH DQHZ VHH FKDSWHU “
setting cooking DURA-
7,21WLPHZLWK&25(SUREHµ
at page
53
.
The target core temperature depends on many
variables: nature of the food at hand, its size, etc.
The user's experience will allow him to deter-
mine the proper value.
MULTIPOINT PROBE: is a standard built-in feature
RI ´32:(5µ RYHQV ZLWK FRGH HQGLQJ LQ 3 HJ ;9
-
C705E PLWPHDVXUHVWHPSHUDWXUHLQVHYHUDOSRLQWVRI
the needle and the screen output is an average of all
values taken.
SOUS-VIDE PROBE: measures temperature only at the
needle tip.
Handle the probe with care because it is
extremely sharp and, after use, the nee-
dle reaches high temperatures.
Extract the probe from the food's core
before taking out the trays from the
oven, and set it on its external probe
KROGHU QHYHU OHDYH LW GDQJOLQJ LQVLGH
RXWVLGHWKHRYHQFDYLW\
Before extracting the tray check that the probe
cable is not in the way.
BakerTop
™
ChefTop
™
English
47