Unox BakerTop, Инструкция и технические данные

Страница: 6 / 80

Core temperature setting
The core temperature is shown on display panel 1
and is set with the buttons .
As soon as the set core temperature is reached, the
cooking step finishes and the following step (if selected) starts.
0°C 100°C
External core probe kit, XC240, is available to allow
you to connect a further small core probe, suitable
to vacuum cooking and small pieces of food.
Chamber temperature setting
The temperature inside the cooking chamber is
shown on the display panel 2 and is set with the but-
tons .
260°C 0°C
Delta T setting
Delta T value is shown on the display panel 2 and is
set with the buttons .
0°C 100°C
CLIMA LUX
Climate setting
The setting of the climate inside the cooking cham-
ber ( STEAM.Maxi™ / DRY.Maxi™ ) is shown
by CLIMA LUX ellipse and is set with the buttons
.
The 10 blue led’s indicate the percentage of steam
inside the cooking chamber (
STEAM.Maxi™
); the
10 red led’s indicate the percentage of dry air
( DRY.Maxi™ ).
STEAM
M axi
DRY
M axi
Cooking start / stop
To start a cooking cycle touch the button.
When the cooking starts, the led “START STOP”
turns on.
To stop the cooking cycle touch the button .
When the cooking cycle has finished, both in ma-
nual and program mode, the oven makes an audible
alarm for 15 seconds and the display 1 flashes for 45
seconds. During this 45 seconds time the “START /
STOP” led remains on:
if you touch the button you increase the
set cooking time. The oven automatically starts
again (with the last cooking cycle settings)
if you touch the button the “START /
STOP” led turns off and all settings are reset.
if none of the buttons are touched, after 45 sec-
onds have passed, “START / STOP” led turns off
and all settings are reset
•
•
•
ENGLISH
5
ENGLISH
ChefTop™ - BakerTop™