English
12
Oven-User Communication
The digital control panel of the BakerTop™ ovens is design to report possible error messages of the
oven and the connected accessories.
Warning messages (attention):
When a malfunction is detected which allows the appliance to continue operating, it works in a limited manner,
a WARNING message is displayed.
The device continues to run and the WARNING message remains on the display until the button
is pressed.
DISPLAY
DESCRIPTION
EFFECT
POSSIBLE PROBLEM
PROBLEM SOLUTION
WL01
An error has been
detected in the data
recorded by the
humidy probe.
The prover contines
to operate, but it
is not possible to
use automatically
humidity setting.
Humidity probe not correctly
connected
Contact the Customer
Assistance Service
Humidity probe damaged
Contact the Customer
Assistance Service
Prover board damaged
Contact the Customer
Assistance Service
WL02
The temperature of
the prover power
board is too high.
The prover keeps
on working
The temperature on the
prover board exceeded 70 ° C
Contact the Customer
Assistance Service
Prover board damaged
Contact the Customer
Assistance Service
Electrical noise level very high
Contact the Customer
Assistance Service
WL10
An error has been
detected in some non-
essential parameters of
the prover board.
Prover STOP
Prover board damaged
Contact the Customer
Assistance Service
Wrong parameters
Contact the Customer
Assistance Service
Oven-user communication
