BakerTop
™
English
11
Manual entry of water
It is possible to manually enter water in the prover chamber by pushing the
button:
each time the user push that button the water will enter for 5 minutes.
In this way the prover generates a considerable amount of useful steam for rising of bakery products,
bread and similar.
Start / interruption of the holding process
To start an holding program touch the button
.
To stop the holding program touch the
button.
When a holding program is finished the oven connected to prover will beep for 15 seconds and the
display flashes for 45 seconds.
During the 45 seconds the led lights
stay on.
If in that time the button “+” is pressed the time increases and the prover start automatically with the
pre-setting parameters related to the rising program.
If the user push the button
and the led lights
turn off and all the parameters are resets; if the
user doesn’t press any button, after 45 seconds, the led
switches off automatically and all operating
parameters are reset.
Operation control
