UNIVIEW OET-213H-NB Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 87

UNIVIEW OET-213H-NB Скачать руководство пользователя страница 75

70

Parameter

Description



Multiple Faces: The GUI displays information about multiple identified
persons after face recognition succeeds. Information about recent five
persons identified successfully can be displayed at most. Information
about the latest person identified successfully is displayed on the left of
the screen.

It is set to

Single Face

by default.

Name



Default: The face recognition terminal displays a person's name after
face recognition succeeds.



Encrypt Display: The face recognition terminal encrypts a person's name
and displays only partial information after face recognition succeeds.



Custom: The face recognition terminal displays information defined here
rather than a person's name after face recognition succeeds.

A string of 0–10 characters can be entered in the custom box.

Extended Info



Display Time: The face recognition terminal displays the current system
time.



Remarks: The face recognition terminal displays a person's remarks after
face recognition succeeds.



Hide: The face recognition terminal displays neither time nor a person's
remarks after face recognition succeeds.

Recognition Result Message



Default: The face recognition terminal displays "Identified successfully"
after face recognition succeeds.



Custom: The face recognition terminal displays information defined here
after face recognition succeeds.

Temperature Measurement Count



Display: The face recognition terminal displays the total number of
people with temperature taken and the number of people with normal
temperature.



Hide: The face recognition terminal does not display the total number of
people with temperature taken and the number of people with normal
temperature.

IP Address



Display: The face recognition terminal displays the IP address of the
terminal.



Hide: The face recognition terminal does not display the IP address of
the terminal.

Measurement Illustration



Display: When the temperature measurement function is enabled, the
face recognition terminal guides wrist temperature measurement.



Hide: When the temperature measurement function is enabled, the face
recognition terminal does not guide wrist temperature measurement.

Temperature reminder



Display: The GUI shows the measured temperature.



Hide: The GUI does not show the measured temperature.

Temperature parameter



Display: The bottom status bar on the GUI shows the measured
temperature and the time when the temperature is measured.



Hide: The bottom status bar on the GUI does not show the measured
temperature and the time when the temperature is measured.

Temperature result font size



Small: The GUI shows temperature results in small fonts.



Medium: The GUI shows temperature results in medium fonts.



Large: The GUI shows temperature results in large fonts.

(3)

Click

Save

to complete the configuration.

«
...
73
74
75
76
77
...
»

Содержание OET-213H-NB
























































































Отзывы:

Нет отзывов