36
When the face recognition terminal conducts O&M management on a gate machine through a serial port or it
connects to an IC card reader, serial port information needs to be configured. Perform the following operations to
configure a serial port:
NOTE!
The serial port configuration interface varies with the device type.
(1)
Choose
Setup
>
Common
>
Ports & Devices
and click the
Serial Port
tab.
Figure 7-22
Serial Port Configuration Interface
Table 7-9
Parameter Description
Parameter
RS485_1
RS232_1
Port Mode
Security/Temperature Module: Select this option
when the face recognition terminal connects to a
digital detection module through the RS485
serial port.
IC Card Mode: This option is displayed when the face
recognition terminal has a built-in card reader.
Enable QR code
reader /Enable
Security
Module
The configuration is not supported.
/
RS485 Address
The configuration is not supported.
/
Format
/
Card number reading and storage mode.
For example, the card number 4204783027 is stored
with binary in different ways as follows.
Ascending Order:
1111 1010 1001 1111 1110 0101 1011 0011
Descending Order:
1011 0011 1110 0101 1001 1111 1111 1010
Baud Rate
The configuration is not supported. Use the default value.
Data Bits/ Stop
Bits/ Parity/
Keep the default values as follows:
Data Bits: 8
