Unitek Classic P3 400/450-15, Руководство пользователя

Страница: 4 / 26

4
Classic P3 x/x -15-40A
G
e
n
e
ra
l
in
fo
rm
a
tio
n
Attention
This device description MANUAL P3 only describes the basic control unit and it
must be read in conjunction with a control manual (e.g. REG).
The following control units for 1 quadrant control are available:
analogue control REG
General information
In conjunction with a control board (e.g. REG) the Classic P3 range of thyristor
drives act as current controllers (moment of inertia controllers).
A 26-pin connector, common to all boards, is used to connect the power section
and the control electronics. Using this interface it is possible for any external
control arrangement including third party equipment to drive the power section.
P3 drives are used to control the speed, the voltage or the moment of inertia of dc
motors.