United States Stove PELLET 5660(I), Инструкция по установке и эксплуатации

Страница: 4 / 40

4
SAFETY INFORMATION
Be sure to read the entire owner’s manual prior to installing and operating this Pellet heater. Failure to follow
these instructions could result in fire, property damage, bodily injury or even Death.
This stove’s exhaust system works with negative combustion chamber pressure and a slight positive chimney
pressure, it is extremely important to ensure that the exhaust system be sealed and airtight. The ash pan and
viewing door must be securely fastened in order for the unit to be airtight. This Pellet heater will not operate using
natural draft or without a power source for the blowers.
The use of grates or other methods of supporting the fuel is not permitted.
This Pellet heater is designed to burn pellet wood fuel only. Do not use any other type of fuel; doing so will void
any warranties stated in this manual.
THE USE OF SOLID WOOD FUEL IS PROHIBTED BY LAW.
This Pellet heater is designed for residential installation according to current national and local building codes. It is
also approved as a mobile home heater which is designed for connection to an outside combustion air source.
When installing a Pellet Stove in a mobile home, it must be electrically grounded to the steel chassis of the home
and bolted to the floor. Make sure that structural integrity of the home is maintained.
Make sure that structural integrity of the home is maintained when passing vent pipes through walls, ceilings and
roofs
It is recommended that the exhaust vent be cleaned bi ‐ annually or after every two tons of pellets.
Soot or creosote may accumulate when the pellet heater is operated under incorrect conditions such as an
extremely rich burn (black tipped lazy orange flames). Do not operate the stove if the flame becomes dark or sooty
or if the burn pot overfills with pellets. Turn the stove off and call your dealer.
The grounded electrical cord must be connected to a standard 120 volt, 60 hertz electrical outlet. Ensure that the
electrical cord is not trapped under the appliance and that it is clear of any hot surfaces or sharp edges.
The ash pan and viewing door must be locked securely for proper and safe operation.
DO NOT PLACE UNBURNED OR NEW PELLET FUEL IN THE ASH PAN. A fire in the ash pan may occur.
Do not operate your pellet heater if you smell smoke coming from it. Turn it off, monitor it and call your dealer.
Repair and servicing of your U.S. Stove Pellet Burning Room Heater may only be done by a qualified technician.
Disconnect the power cord before performing any maintenance or repair.
NOTE: Turning the Pellet Stove Room Heater to "off" does not disconnect power from the unit.
The Pellet Stove Room Heater will not operate during a power outage, if a power outage or tripped circuit occurs,
check for smoke spillage and open windows or doors to ventilate as necessary.