background image

 

                                                                             

 

© 2016 unitech Electronics Co., Ltd. All rights reserved.   

unitech is a registered trademark of unitech Electronics Co., Ltd.

 

MS926 User’s Manual 

Adapter Notice 

 

1.  Please do not leave the power adapter in the socket when it is not 

connected to your unitech product for charging. 

2.  Please remove the power adapter when the battery is fully recharged. 
3.  The bundled power adapter that comes with your unitech product is not 

meant to be used outdoors. An adapter exposed to water or rain, or a very 
humid environment can cause damage to both the adapter and the 
product.  

4.  Please only use the bundled power adapter or same specification of 

adapter to charge your unitech product. Using the wrong power adapter 
can damage your unitech product. 

 

* The message above only applies to the product connected to the adapter. 

For the products without using the adapters, please refer to the specification of 
each product. 

 

Hearing Damage Warning 

 

Zx.3 Warning 

The warning shall be placed on the equipment, or on the packaging, or in the instruction 

manual and shall consist of the following: 

-    the symbol of Figure 1 with a minimum height of 5 mm; and   

-    the following wording, or similar :   

      To prevent possible hearing damage, do not listen at high volume levels for long periods. 

 

Alternatively, the entire warning may be given through the equipment display during use, when 

the user is asked to acknowledge activation of the higher level. 

 

 

Содержание MS962

















































































































































Отзывы: