background image

 

                                                                             

 

ix 

© 2016 unitech Electronics Co., Ltd. All rights reserved.   

unitech is a registered trademark of unitech Electronics Co., Ltd.

 

MS926 User’s Manual 

Storage and safety notice 

Although charged batteries may be left unused for several months, their 
capacity may be depleted due to build up of internal resistance. If this happens, 
they will require recharging prior to use. Batteries may be stored at 
temperatures between -20°C to 60°C, however they may deplete more rapidly 
at higher temperatures. It is recommended to store batteries at room 
temperature. 
 

* The message above only applies to the usage of the removable batteries.   

For the products with non-removable batteries / without batteries, please refer to 
the specification of each product. 

 

Product Operation and Storage Notice 

The unitech product has applicable operation and storage temperature 

conditions. Please follow the limitation of suggested temperature conditions to 

avoid failure, damage or malfunction. 

*

For applicable temperature conditions, please refer to the specification of each 

product.

 

Содержание MS962

















































































































































Отзывы: