Unitech MS962, Руководство пользователя

Страница: 102 / 144

- 86 -
MS926 User’s Manual
4.6.5 Mobile Phone Read Mode
When this mode is selected, your scanner is optimized to read bar codes from
mobile phone or other LED displays. However, the speed of scanning printed
bar codes may be slightly lower when this mode is enabled.
Note: To turn off Mobile Phone Read Mode, scan a Manual or Serial Trigger Mode bar code .
Hand Held Scanning - Mobile Phone
Presentation Scanning - Mobile Phone
4.6.6 Hands Free Time-Out
The Scan Stand and Presentation Modes are referred to as “hands free”
modes. If the scanner’s trigger is pulled when using a hands free mode, the
scanner changes to manual trigger mode. You can set the time the scanner
should remain in manual trigger mode by setting the Hands Free Time-Out.
Once the time-out value is reached, (if there have been no further trigger pulls)
the scanner reverts to the original hands free mode. Scan the
Hands Free
Time-Out
bar code, then scan the time-out duration (from 0-300,000
milliseconds) from the inside back cover, and Save. Default = 5,000 ms.
Hands Free Time-Out