Unitec ETL3000 Скачать руководство пользователя страница 15

Страница: 15 / 53

Technical Description

3.1.1 Optional accessories – Technical data

OPTIONS for ETL unit

Dust monitoring (ETL ONE)

The following choices are available for PM 10

and/or

PM 2.5 monitor

Built-in monitor in the ETLONE case:

ETL-One PDR

: with built-in PDR1500 (0-400 ug/m3)either PM 2.5 or PM 10

ETL-One ETLS : Unitec light scattering

(0-1500 ug/m3 for either PM2.5 or PM10)

ETL-One DST

: built-in light scattering (TSI) for PTS, PM10, PM4, PM2.5, PM1

External PM monitor to ETL case:

4) OSIRIS (0-600 ug/m3 for PM1-PM2.5) and (0-6000ug/m3 for PM10 and PTS)

5) APM2 : PM10, PM2.5 CERTIFIED ACCORDING TO EN:12341

Noise sensor

dB 3000 Sound level meter Class 1 with 60 dB dynamic range

Data Transmission

Modem (RF, GSM, GPRS, UMTS) or Ethernet (LAN, WLAN)

Software:

@COM3000

remote data handling and elaboration software (report, graphs, statistics,

configuration)

Meteorological parameters

Wind direction, Wind speed, Temperature, Humidity, Pressure, Rain fall, Solar radiation, UV

radiation (last two parameters are optional)

Solar panel and battery kit

Solar panels, battery, regulator for 24 hours autonomy.

This kit is designed to power an ETL with up to 5 sensors, modem GSM and a

meteorological station.

In case the ETL is ordered with the solar panel and battery kit, the ETL will be powered

only at 12V C.

The box with battery supplied with the ETL can be main powered at 220V or powered at

12VDC from the solar panel. The battery will power the ETL and/or the dust module at

12VDC.

Solar Panel

Nominal output Solar Panel (P max): 150 W

Voltage at P max (Vmp): 17,64V

Current at P max (Imp): 8,50A

Open Circuit Voltage (Voc): 21,17V

Short Circuit Voltage (Isc): 9,51A

Cell Efficiency: 17,12%

Module Efficiency: 15,02%

Solar Cells: 36 (4x9)

Cells Dimensions: 156 x 156mm (6 x 6”)

Dimensions: 1482x 674 x 35 mm (58,3 x 26,5 x 1,4 “)

Weight: 9,9 Kg (21,82 lb)

Battery

Nominal Voltage: 12 V

Capacity (20Hr at 25 °C): 100 Ah

Length: 330 mm (12,99 “)

Width: 171mm (6,73”)

Height: 220mm (8,66”)

Approx. Weight: 30 Kg (66,14 lb)

Nominal Operating temperature: 25°C + 3°C ( 77°F+ 37,4°F)

Operating Temperature Range: -15°C + 50°C ( 5°F + 122°F)

ORION S.r.l.

ETL_Operation and Service manual_ 02_17.docx

Pag. 15/35

Содержание ETL3000






















































Результаты поиска

Содержание ETL3000

Отзывы:

Бренды по названию

Популярные бренды

Unitec ETL3000, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание ETL3000

Отзывы:

Бренды по названию

Популярные бренды