Unique Perspectives Genie, Руководство пользователя

Страница: 57 / 84

User Manual Genie Joystick Nov 07
©Unique Perspectives Ltd. www.click2go.ie Page 57
Programming Mode
All programmable parameters can be adjusted on the Genie Joystick itself
without the need for a DX hand held programmer or a DX Wizard program.
To select the Programming Mode
1. Located at the front of the Genie Joystick is a small hole through which
you have access to the programming switch.
2. Connect the Genie Joystick to a DX system.
3. Turn on the Genie Joystick by pressing Switch 1.
4. Press and release the programming switch using a pencil or other suitable
non-metallic object.
LED meaning in program mode.
The parameters are divided into 4 separate groups or ‘pages’.
Page 1 is identified by 1 flash of the decimal point in the 7 segment display. To
move on to the next page press Switch 2.
Page 2 is identified by 2 flashes of the decimal point. To move on to the next
page press Switch 2.
Page 3 is identified by 3 flashes of the decimal point. To move on to the next
page press Switch 2.
Page 4 is identified by 4 flashes of the decimal point.
To exit program mode press Switch 2 one more time. The decimal point flashes
rapidly to indicate the end of program mode and the saving of all parameters
after which normal operation continues.
The battery LEDs of the Genie Joystick are used to indicate which parameter
within a particular page is being adjusted. There are six parameters in each
page and the current parameter is identified by the number of illuminated battery
LEDs. The exception is page 4 which does not use the battery gauge and is for
creating your own set of operation modes. This is discussed further on.
The 7-segment display indicates the value of a particular parameter. The
parameter can be a number or a ‘Y’ or ‘N’ symbol.