User Manual
Genie Joystick
Nov 07
©Unique Perspectives Ltd.
www.click2go.ie
Page 47
2. Confirm that the Genie joystick turns off.
Alternatively
1. Press Switch 2 and confirm that the Genie joystick turns off.
External Access Check Sequence (if fitted)
1. Connect the Genie joystick to the external device using the correct interface
cable. See page 38 for details.
2. Press Switch 1 and choose External Access mode by deflecting the joystick
forward until a ‘E’ symbol is displayed. Then press Switch 1 again.
3. Confirm that the joystick is operating the external device as expected.
4. Press and hold Switch 1 until the Genie emits a beep to return to driving
(about 2 seconds).
Computer Access Check Sequence
1. Connect the Genie mouse emulator to the USB port of your computer and
then turn on the computer.
2. After Windows starts confirm that the green LED behind the front panel of
the emulator is blinking. This indicates that the USB connection is
established but that the signals from the Genie joystick on the wheelchair are
not being received.
3. Position the emulator at the edge of the table in line with the computer
monitor.
4. Turn on the wheelchair by pressing Switch 1 on the Genie joystick and
position it facing the computer monitor.
5. Confirm that the green LED behind the front panel of the emulator goes
steady. This indicates that the infrared link between the Genie joystick and
the mouse emulator is working correctly.
If the green LED does not come on steady then the joystick is out of range,
not positioned properly or there is an obstruction in the way. The emulator
should be able to pick up the signals from a distance of 2 metres with a ±30°
spread in all directions. This ability can deteriorate with the effect of ambient
lighting. It is important to position the emulator overlapping the edge of the
Содержание Genie
Страница 82: ......
