Unipulse TM201, Руководство по эксплуатации

Страница: 29 / 58

20
3 Setting Procedures
20
Setting Procedures
Chapter
3
3-6.
Calibration tab
Setting of sensor type and setting and calibration related to the TM201 calibration values are
performed.
„
Detail
When this item is checked, detail items related to calibration (calibration setting,
calibration, rotation speed) are displayed. If this check is removed, this item is
not displayed (default).
„
Sensor type
Select the type of UTM
Ⅱ
connected and start calibration.
Refer to P.26 "4-2.Sensor type setting and calibration" for
details.
„
Retrieve calibration settings
"Retrieve" button
Calibration setting values are received from the TM201 all at
once.
(Normally, these values are received at the time of this application startup.)
„
Initialization of calibration settings
"Initialize" button
Calibration setting values inside the TM201 are initialized.
When this button is clicked, a confirmation dialog is displayed. With this operation, settings on the
PC and inside theTM201 are initialized and cannot be restored; therefore, click the "Yes (Y)" button
only when it is absolutely necessary to initialize.
When the calibration setting protection is ON, initialization cannot be performed.
Refer to P.44 "7-1.List of setting values" for default values.
Calibration itself is not performed.
Detail items
(Calibration setting,
calibration, rotation speed)
Check