Unipro UniGo 5005, Руководство пользователя

Страница: 29 / 56

29
Setup mode
C o n f i g u r i n g
t h e L a p t i m e r
LEARN GEARS
UniGo use the relation between the speed and
the RPM to calculate the current gear number.
Learn gears popup ready to learn 1st gear.
When the learning is started, it is im-
portant to drive slowly in the gear
indicated on the display. When the
kart steady, press the
ok button
( ) to learn that gear and to move to the next.
All gears are learned and will be saved.
When all the gears are learned they will be
saved in memory and it is not required to learn
them again until the kart’s setup is changed.
ENGINE MENU
The engine menu contains all the settings
related to the engine.
All settings related to the engine are on
these two engine menu screens.
Use the
up
( ) and
down
( ) buttons to
move around in the menu and press the ok
button ( ) on the relevant line to change the
value. To accept the changes press the
ok but-
ton ( ) again or press back ( ) to cancel the
changes and revert to the original value.
ENGINE TIMERS MENU
The engine timer menu contains all the set-
tings related to the five engine timers.
Engine timers menu with timer no. 3 active.
Use the up ( ) and down ( ) buttons to
move around in the menu and press ok button
( ) on the relevant line to change the value.
To accept the changes press the
ok button ( )
again or press back ( ) to cancel the changes