Unipro UniGo 5005, Руководство пользователя

Страница: 26 / 56

26
Setup mode
C o n f i g u r i n g
t h e L a p t i m e r
it easy, they are also located here.
All settings you use all the time are located
in the most used menu.
Use the up ( ) and down ( ) buttons to
move around in the menu and press the ok
button ( ) on the relevant line to change the
value. To accept the changes press the
ok but-
ton ( ) again or press back ( ) to cancel the
changes and revert to the original value.
TRACK MENU
The track menu contains all the settings
related to the track.
All settings related to the track are on the
track menu screens. Please notice the differ-
ence between 3005 and 5005.
Use the up ( ) and down ( ) buttons to
move around in the menu and press the ok
button ( ) on the relevant line to change the
value. To accept the changes press the
ok but-
ton ( ) again or press back ( ) to cancel the
changes and revert to the original value.
LOAD TRACK
It is much easier to identify data if you enter
Select a track from the list of saved tracks.
Use the up ( ) and down ( ) buttons to
move around in the list and press the ok but-
ton ( ) to select a track.
TRACK NAME
It is much easier to identify data if you enter
for instance the track name. The track name is
simply a text used to identify the track. Enter it
as described here: “ENTERING TEXT” on page
35.
RECEIVER
The receiver is used to trigger the Laptimer at
the start/finish line. The Laptimer can use all
types of receivers. Chose between IR (infrared),
Loop (MYLAPS active loop) and magnet
(magnet stripe in the track). Each receiver is
a different kind of hardware and the setting
need to match the physical receiver connected
to the Laptimer.
If the receiver is connected through the
black cable splitter, it must be connected
to input 1.