UNIPRO – The original Laptimer
50
Pit mode
After the race, you can view all the stored data in pit mode.
NORMAL DATA VIEW
Pit mode is for analysing the data stored in the Laptimer. If
is pressed from either firstlap mode or running mode,
you will enter pit mode.
When entering pit mode, the Laptimer jumps to the best lap.
In this example, the best lap is lap #18. From this point, you
can go two ways: If you press
you will go to the next
lap (19 in this example). If you press the
button, the Laptimer jumps to lap # 1.
The BEST LAPTIME icon at the top indicates the best lap time. The
button changes the
data shown in the upper display.
changes between the high (maximum) and the low
(minimum) data values stored.
When driving with splits, everything is stored on splits as
well as laps. Use the
button to toggle between all the
splits stored in the Laptimer. This example shows the
maximum data and the split time for split number 1.
The segment from the last split point to the finish line is
called split last. This split is marked L instead of a number.
GRAPHICAL DATA VIEW
On this screen you can scroll through the laps and see the
current lap time, best lap time and the difference between
the current and the best lap time well as laps. Together with
the numbers there is a graphical view of the difference
between current lap time and best lap time. Use
and
to scroll through the laps.
