UNIPRO – The original Laptimer
33
Wheel circumference
It is entered in millimetres and you need to measure this
quite often to keep the system accurate. The best is to use a
soft tape measure and do it every time you go out from the
pit. It will have influence on the speed, the tire wear
counters, and most important the split points.
Adjust the circumference by using the
and
buttons.
Tire wear counters
The Laptimer can store the kilometres or miles of up to 8
different sets of tire, each running up to 999 kilometres (or
miles).
Before every training or race, you simply go to setup mode
and choose the tires you are using, by using the
and
buttons to find the right tire number.
If you should forget to choose the right tire wear timer
before a training or a race, you can manually edit the timers. First, choose the right tire
number and then push
. This will give you access to edit the kilometres or miles
registered on the chosen tire wear counter. This is explained in the next step.
You can use the
and
buttons to change the
distance. Each press will count one kilometre up or down.
You can press
to reset the counter. Close again by
pressing .
Please notice: The icon is indicating a distance in meters. It
is actually in kilometres (or miles).
