UNIPRO – The original Laptimer
54
Update with a PC
To be able to update the Laptimer with USB, you should first make sure you have a Unipro USB
cable! This cable is necessary to upgrade the Laptimer. You should have installed the USB driver
and the connection should be working before trying to update the Laptimer. It is easy to check the
communication with the PC Analyser program and if you can transfer data from the Laptimer to
the PC Analyser program, you are ready to go.
Download the update program from uniprolaptimer.com and run the program from Windows.
When starting the program you will see the following. Please select the language you prefer.
When starting the program you will see the following. Please select the language you prefer.
You just need to go through 8 simple steps to
upgrade the Laptimer. The button will change
when you are ready to go to the next step.
When getting to step 6, you are updating the
Laptimer and can only sit back and relax for 1
minute while the update is going on.
When the update is finished and you turn on
the Laptimer again a message will be shown
in the display. This should be FLASHED
indicating that the Flash memory is
programmed. After this message is displayed,
you will see the display go blank for a 1
second before going to firstlap mode. In this
short delay, the two update programs may be
updated.
Please try to keep your Laptimer up to date to ensure optimal performance.
