Unipower ARR-M Series, Руководство по эксплуатации продукта

Страница: 39 / 136

BATTERY CHARGER USER’S MANUAL PART- 2: THEORY OF OPERATION
MCEnPC23-REV.2.4 Page 34
viii. Remote Equalize (optional)
If Remote Equalize is enabled, the charger will go into “Equalize” mode during a preset time between 1 and 8191
hours, if command is initiated by users via web page, or whenever an external normally open contact closes
momentarily or permanently. For more details, refer to Appendix-5. We can enable or disable remote Equalize via
the external normally open contact as shown on the procedure below:
Figure 37 : External signal to Start Equalize remotely.
Control?
Ok
Next Pr
Exit
Adjust? Level1
Ok Next Pr
Exit
Eq Start
Set Exit Next
Pr
ON Eq Remote
Set
Exit Next
Pr
ON OFF
Out Time
Next Exit
08H
: get you Next till Press
: get you Next till Press
Next
Exit

-
ON Eq Remote
Figure 38 : Procedure to enable or disable and adjust Remote Equalize.