Unipower ARR-M Series, Руководство по эксплуатации продукта

Страница: 22 / 136

BATTERY CHARGER USER’S MANUAL PART- 2: THEORY OF OPERATION
MCEnPC23-REV.2.4 Page 17
7.2.2 Readings
By default, the readings are the battery DC voltage and the rectifier output current. The LCD can also show the
following additional readings:

Line Frequency.

Rectifier output voltage.

Voltage between positive and chassis.

Voltage between negative and chassis.

Remaining time for Equalize.

Elapsed time for Equalize.

Temperature inside charger.

Battery temperature (optional).

Voltage test during battery test (optional).

Current test during battery test (optional).

Time during battery test (optional).
The next figure describes the procedure to access all readings that can be displayed on LCD:
Readings? Level0
Readings?
Frequency
60.1Hz
VRect
136.2V
/CHASS - V
68.1V
/CHASS V

68.1V
RemTEq 400mn
ElapsTEq
100mn
C 26
VTest
132.5V
ITest 25A
TTest
60mn
Exit Pr Next Ok
: get you Next till Press
BoardTemp
Temp Batt
C 21
Exit Pr Next Ok
Exit Pr Next
Exit Pr Next
Exit Pr Next
Exit Pr Next
Exit Pr Next
Exit Pr Next
Exit Pr Next
Exit Pr Next
Exit Pr Next
Exit Pr Next
Exit Pr Next
Figure 16 : Procedure to access Readings menu.