UniPOS VIT 01, Инструкция по эксплуатации

Страница: 31 / 51

UniPOS Wireless Fire Alarm Control Panel VIT 01
Instruction manual Page 31
Revision 10/02.17 Pages 51
Press buttons and to make a selection from the submenu, button returns the
display in menu
„Zones”.
12.4.2.2.1. Parameter
„Zone name”
Enter the name character by character.
The following buttons are used:

buttons and to select the
specific character from the set of
characters;

button - to move to entering the
next character of the name;

button - to exit in menu
„Zones”.
The maximum number of characters is 8. After inserting the last character, press button , to
save tha name and proceed to the next parameter.
Holding down button also saves the introduced name, without the need of entering a maximum
number of characters.
Depending on the selected language, the possible sets of characters are different:

for Bulgarian
: _АБВГДЕЖЗИЙКЛМНОПРСТУФХЦЧШЩЪЬЮЯ-9876543210;

for English and Italian: _ABCDEFGHIJKLMNOPQRSTUVWXYZ-9876543210;
.
12.4.2.2.2. Parameter
„Inspection time”
The inspection time is additionally added
time (in seconds), that the user could activate in
order to make a physical check upon released
signal for fire condition. Inspection time shall be
added to the time period between phases
„Fire
1” and „Fire 2”.
Active buttons are:

buttons and - for
changing the parameter value;

button - for saving and moving
to the next parameter;

button - to exit menu in
„Zones”.
The parameter accepts values from 0 to 240. Default value is 0 seconds.
12.4.2.2.3. Parameter
„ Time period P1-P2”
The parameter sets the time (in seconds)
between phases
„Fire 1” and „Fire 2”.
Active buttons are:

buttons and - for
changing the parameter value;

button - for saving and moving
to the next parameter;

button - to exit menu in
„Zones”.
The parameter accepts values from 0 to 240.
Default value - 60 seconds.