unipo UFP 6", Руководство по эксплуатации

Страница: 16 / 96

Universal unipo® Flat Panel UFP
Safety
14
Revision status 19.01.2010
2.3 Intended use
Equipment safety and reliability is only guaranteed if used as intended in accordance with the
information in the operating manual.
The UFP serves the visualization of processes and data (visual display units and control
panels) and is a replacement for old tube type display units
It is universally used on machines and plants.
Intended use also includes correct adherence to assembly, operating, maintenance and
cleaning instructions.
ATTENTION!
Any other use of the device that differs from this or exceeds this is prohibited
and is considered unintended!
Claims of any kind against the manufacturer and/or his authorized
representatives resulting from damage caused by unintended use of the device
are excluded.
The customer is solely liable for any damage resulting from unintended use.
2.4 Dangers the device may present
The product has been subjected to a danger analysis. The resulting construction and design
of the device correspond to the state-of-the-art.
Nonetheless, some risks remain!
The device works with high electric voltage.
WARNING! Danger caused by electric current!
Electrical power can cause severe injuries. There is a danger of life caused by
electric current if the insulation or individual components are damaged.
– Switch off the power supply and secure against switching on again before starting
maintenance, cleaning or repair work.
– Before starting any work on the electric system switch off the device and check
that it is free of current or voltage.
2.5 EMERGENCY STOP switch
The device is used within a plant and has no Emergency Stop switch installed.
The customer must therefore make sure that EMERGENCY STOP switches are installed in
compliance with valid accident prevention regulations.
Operating personnel must be demonstrably informed by the customer about the location and
function of the EMERGENCY STOP switches.