unipo UFP 6", Руководство по эксплуатации

Страница: 26 / 96

Universal unipo® Flat Panel UFP
Design of the UFP
24
Revision status 19.01.2010
4.3 Technical data
The device has been developed in accordance with IEC204-3 for use as electronic
equipment for machines and plants.
It has been designed as universally usable monitor replacement using flat screen technology
for 24-hour industrial use.
Connection AC version – inlet connector for non-heating appliances
DC version – 4-pin connecting plug
Supply voltage AC version 84 V
AC
- 264 V
AC
, switched-mode power supply
(SMPS)
optional DC version 18 V
DC
- 32 V
DC
, switched-mode power
supply (SMPS)
Input power up to max. 40 W (depending on display type)
Interface depending on I-module variant used
Degree of protection front side IP 65
1
; back side IP 20
Frequency horizontal min./max. 12 / 100 kHz
vertical min./max. 40 / 100 Hz
Display protection 3mm Conturan screen with interference optical glare
suppression glass
Reliability MTBF Background illumination 50,000 h
2
; electronics 75,000 h
Weight approx. 6 kg (depending on display type)
Video modes TTL, EGA, CGA, BAS, RGB, Comp. Sync., Interlace,
Sync. to green, VGA, and others
Special features • meets the requirements of video workstations
• plug&play setting in connection with the unipo
®
input
modules
• 16 user specific image settings can be stored
• up to 128 image formats in supplied library
• Fine tuning of screen parameters via OSD and control
unit
• unipo
®
video FPGA
Table 5: Technical data
1
In connection with unipo
®
installation accessories
2
Brightness < 50% of the original value at 25°C, depending on display type