unipo UFP 6", Руководство по эксплуатации

Страница: 39 / 96

Universal unipo® Flat Panel UFP
Software description
Revision status 19.01.2010
37
6 Software description
This description applies for UFP-units with firmware version 06/04/00 or higher.
The version number appears in the On-Screen-Display when booting or can be interrogated
via the menu (
GLOBAL SETTINGS
/
Version
).
6.1 General information
The UFP process different video signal from various sources.
The transient response to correct display is adjusted as follows:
• automatically by the unipo
®
video FPGA and an integrated micro controller by means of
the integrated format library
• automatically by the UFP (if no matching parameters are available in the integrated
format library)
• manual configuration by the user (readjustment of parameters after the automatic
adjustment is possible)
The manual readjustment takes place via a cable linked control unit in connection with an
OSD (On-Screen-Display).
The settings may have a name assigned to them and stored as user settings.
If the user does not interfere or has no control unit at hand, the setting will be automatically
saved after a short delay.
6.2 Automatic configuration of parameters
After initial switching on the UFP will browse through the integrated format library.
The matching formats for the input signal will be displayed on screen in the menu
SELECT
in
form of a list.
If no selection is made with the navigation keys [ ► ] and [ ► ] within a certain period of time,
the first displayed value will automatically be accepted and saved.