Uninterruptible Power Supplies PowerWAVE 8000DPA RI Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 76

background image

UPS338-01-00 PowerWAVE 8000-RI DPA User Manual Dated 5 April 2013

5-1

5

Maintenance

5.1

Introduction

5.2

System calibration

To ensure optimum UPS operation and continuous, efficient protection of the connected load, it is
recommended that the system’s operating parameters are checked every six months and recalibrated where
necessary. The batteries should also be checked every six months, depending on the ambient temperature.

5.3

User responsibilities

There are no user-serviceable parts contained within the UPS so the maintenance requirements of the user
are minimal. To maximise the useful working life and reliability of the UPS and its batteries, the environment
in which the UPS operates should be kept cool and dust free.

5.4

Routine maintenance

It is essential that the UPS system and batteries receive regular preventative maintenance inspection to
maximise both the useful working life and the reliability of the UPS system. When the UPS is commissioned,
the commissioning field service engineer will attach a service record book to the front of the UPS which will
be used to log the full service history of the UPS.

Preventative maintenance inspections involve working inside the UPS which contains hazardous AC and DC
voltages.

During a preventative maintenance inspection the field service engineer will check:

• Site/environment conditions
• Integrity of electrical installation
• Cooling airflow
• Rectifier operation and calibration
• Inverter operation and calibration
• Static switch operation
• Battery status
• Load characteristics
• Integrity of alarm and monitoring systems
• Operation of all installed options

Preventative maintenance inspections form an integral part of all Extended Warranty Agreements
(maintenance contracts) offered by Uninterruptible Power Supplies Ltd.

For further details on Extended Warranty Agreements see Section 2.

WARNING:

All the operations described in this chapter must be performed by authorised

electricians or otherwise qualified personnel.

WARNING:

Only Uninterruptible Power Supplies Ltd. trained and authorised field service

engineers are fully aware of all of the hazardous areas within the UPS.

«
...
59
60
61
62
63
...
»

Содержание PowerWAVE 8000DPA RI













































































Отзывы:

Нет отзывов

Похожие инструкции для PowerWAVE 8000DPA RI

Power Xpert 9395P

Бренд: Eaton Страницы: 31

Бренд: Eaton Страницы: 4

Бренд: Eaton Страницы: 2

Бренд: Manhattan Страницы: 16

Бренд: Salicru Страницы: 34

SmartOnline 3-Phase UPS System SU30K3/3XR5

Бренд: Tripp Lite Страницы: 6

Бренд: CyberPower Страницы: 2

Бренд: Honeywell Страницы: 30

Telecom Power TP48200A-DX12A1

Бренд: Huawei Страницы: 68

Бренд: Wieland Страницы: 41

Бренд: OPTI-UPS Страницы: 83

Бренд: R-UPS Страницы: 14

Бренд: Power Sentry Страницы: 2

Бренд: Xtreme Power Conversion Страницы: 77

Бренд: Tripp Lite Страницы: 356

venus flexi series

Бренд: Tech Novitas Страницы: 25

Archimod HE 240

Бренд: LEGRAND Страницы: 72

Бренд: Xtreme Power Conversion Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды