Uninterruptible Power Supplies PowerWAVE 8000DPA RI, Руководство пользователя

Страница: 40 / 76

3: Installation
3-24
UPS338-01-00 PowerWAVE 8000-RI DPA User Manual Dated 5 April 2013
3.12.2 X1 & X2 Dry Port (volt-free contacts)
All the Input and Output interfaces are connected to Phoenix terminals (cable 0.5 mm²)
Input Interfaces Terminal block X1
Connection of Remote Shut down facilities, Generator Operation, Customers specials
(see also OPTIONS section).
Figure 3.18 Input Interfaces Terminal block X1 (Dry Ports)
Output Interfaces Terminal blocks X2 (DRY PORTs)
Provision of signals for the automatic and orderly shutdown of servers, AS400 or Automation building
systems. All voltage free contacts are rated 60 VAC max. and 500 mA max.:
Terminal Contact Signal Function
X1/1 +12Vdc Customer IN 1 (default as ONGENERATOR operation)
(NC = Generator ON)
X1/2 Gnd
X1/3 +12Vdc Customer IN 2
(Function on request, to be defined on purchase)
X1/4 Gnd
X1/5 +3.3Vdc Battery Temperature
If connected, the battery charger current is temperature dependent
X1/6 Gnd
X1/7 +12Vdc Remote shutdown
Do not remove the factory mounted bridge until an external remote shut down is
connected
X1/8 Gnd
X1/9 +12Vdc 12Vdc source
Max 200mA load
X1/10 Gnd
Pin Contact Signal Function
X2/1 Alarm MAINS_OK Mains Present
X2/2 Mains Failure
X2/3 Common
X2/4 Message LOAD_ON_INV Load On Inverter
X2/5 (Load on bypass)
X2/6 Common
X2/7 Alarm BATT_LOW Battery Low
X2/8 Battery OK
X2/9 Common
IN
GND
IN
GND
IN
GND
IN
GND
GND
OUT
NO
NC
Com
NO
NC
Com
NO
NC
Com