manualshive.com logo in svg

Uninet iColor LF-600, Руководство пользователя

Поделиться
Скачать
Uninet iColor LF-600 Скачать руководство пользователя страница 7

GRAPHICS FILE DESIGN

It is advisable to organize the graphic design in dierent layers:

- One or more layers for the main graphics.

- One layer for the contour.

- One layer for the markers.

Before sending the 

fi

le for printing you have to enable the graphics layer and the 

marker layer.

Before you save the 

fi

le for cutting you have to enable the contour layer and the 

marker layer.

The most common error is to print all the layers including the contour layer that make the 

prints unusable in most of cases.

Similar commands are available in Adobe Illustrator and Corel Draw to enable and disable 

the layers.

On the pictures in this page there is an external frame that shows the border of the sheet, 

the frame 

was

 not 

d

esigned and saved.

When you open in Illustrator or CorelDraw a le in PDF format, very often you 

fi

nd 

an external frame on the graphics, you have do delete it to operate correctly with the 

iMark software.

Graphics layer

Markers layer

Cut contour layer

Содержание iColor LF-600




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды