Uninet iColor LF-600 Скачать руководство пользователя страница 2

Страница: 2 / 27

iMark DIGITAL CUTTING SOFTWARE

The iMark software for the Gemini needs to be downloaded from our websites

www.dpr-srl.it / www.dpr-llc.com (section: GEMINI - download software)

Execute the installation’s program iMark-setup.

The setup’s program requires various confirmations for the installation of the program.

On some computers you could be asked the system administrator’s password to execute

the installation, in the case you do not have this information; contact the technician who

administrates the system.

During the installation, the iMark program icon is created on the desktop and a shortcut

in the Windows Start Menu.

INSTALLATION OF THE iMark SOFTWARE

This software has been designed to effectively cut sheet labels.

There are also functions for the management of cross cut and hatch.

Allows users to import AI and EPS format files.

All files have to contain two reference marks.

The dedicated video camera connected to the software detects the crop mark in a fraction

of a second and adapts the cut path to the inclination and distortion of the print.

The software runs with the operating systems Windows 7, 8, 10.

Most of old Windows XP computers can be used, but not all of them.

The camera is connected to the computer through a USB port.

Содержание iColor LF-600




























Результаты поиска

Содержание iColor LF-600

Отзывы:

Бренды по названию

Популярные бренды

Uninet iColor LF-600, Руководство пользователя

Результаты поиска

Содержание iColor LF-600

Отзывы:

Бренды по названию

Популярные бренды