BASIC OPERATIONS AND SETTINGS
1.
The camera brightness adjustments may be useful when operating on critical luminosity
condition.
2.
Fine adjustment of the cut position, the values are in tenth of millimeters.
3.
This is the maximum cutting width it depends on the position of the push rollers on the
cutting plotter.
4.
The “
Cut blank labels
” option allows to cut without reading the black marks. You have
to put the black marks on the graphics even though they are not read.
5.
The “
Pause
” button stops temporarily the job you can press the same button that
become “Resume” to continue the job.
6.
The “
Cut Test
” button allows to cut a single sheet for test, allows you to adjust the cut
force and the alignment between the graphic and the cut path before you execute the
work.
7.
The “
Cut force
” value sets the pressure of the blade on the cutting plotter.
8.
The “
Start”
button launches the work and counts the labels cut on the “
Count
” box.
9.
If you select the “
Enter copies
” option you can enter the number of copies to execute
on the “
Copies
” box.
2
2
6
7
8
5
3
4
1
9
