SPECIAL COLOR PANEL
The “
Special Color
” panel allows a separate management for the lines in magenta color
on the graphics file.
When you use the pure magenta outline in your graphic it is recognized by the
iMark software and the “
Special color
” panel is enabled, on the preview it is drawn in
magenta
while
all the other colors are drawn in black.
The MAGENTA color is cut before the rest of the graphics, Speed and Cut force are
settled separately.
The special color can be processed in di
ff
erent
modes:
Dashed line
Plain cut
Blade creasing
If used as Dashed line you can
set
the spacing.
Cut
Length is the section of the line cut by the blade.
The
g
ap is the part of the line where the blade ris
es
up.
In this sample a dashed line is cut on a label for a
fruit jam jar.
It allows to rip easily the label when opening.
For this job enable the Die cutting option and place
the blade holder on the outermost position so you can
avoid to damage the cutting mat.
The dashed line is used as folding line in a couple of
boxes. It is cut before of the die cut.
