FORCE 50
REV. 2.2 2021-02-04
7-3
UNIFIRE FORCE 50 Robotic Nozzle
Installation and setup manual
SOFTWARE & CALIBRATION
Ammolite Software Introduction
Unifire FORCE 50 set up is achieved through our web browser-based graphical user interface (GUI) called “Ammolite™
The Unifire TARGA ROBOTIC NOZZLE PLC connects to a standard TCP/IP based network. The built-in web server has
been set up to be assigned an IP address by an external DHCP server. This can be a local router or a dedicated server in a
larger network, administered by your IT department or similar.
To connect to the web-server, open a browser
Chrome
or
Firefox
and enter the IP address followed by :81 (ex:
http://192.168.0.45:81, replace 192.168.0.45 with the actual IP).
Enter the username and password provided for your system to access the setup environment.
It is required that you make a note in the service log at login.
