11
Installing the Cameras
CAUTION
If you need to use an extention cable, it must be a single stretch of
cable between the UDVR and camera. You cannot connect multiple
extension cables to each other.
Note: The following installation instructions refer to the cameras included with
the UDVR package. If installing another manufacturer’s camera, refer to
installation instructions included with that camera.
1. Verify that the system is powered up and that live views from all cameras display
on the monitor.
2.
Hold the camera in the location where you want it mounted. Check the display on
the monitor to verify that the location is acceptable.
3.
Mount the camera(s) to the desired surface using the parts in the supplied
mounting kit. Choose a firm mounting surface. If mounting on drywall, use the
drywall anchors supplied in the kit.
Table Mount
Wall Mount
Ceiling Mount
Note: Camera may not be exactly as shown.
4.
Adjust the camera stand to ensure that the camera has a satisfactory view
of the area you would like to monitor.
The camera has several adjustment
points to provide maximum flexibility when setting the view angle. To make the
adjustments, use the hex key (included).
Camera View Angle Adjustments
