Page 11
7. The initial setup is now complete. Tap
to proceed. The Configuration wizard can be
restarted later from the Settings menu (page 65).
8. You are offered to watch the Tutorial that leads you through the basic steps of navigation, or to run
Demo route simulations. To start using the software right away, you can tap
to
skip the tutorial as you can run it later from the ‘More’ menu (page 64).
9. After the initial setup, the Navigation menu appears and you can start using the software. This is the
screen you see every time navigation starts.
The typical way of using the software is to select a destination, and start navigating. You can select
your destination in the following ways:
• Enter a full address or a part of an address, for example a street name without a house number or
the names of two intersecting streets (page 25).
• Enter an address with postal code (page 34). This way you do not need to select the name of the
settlement and the search for street names might be faster as well.