Uniden G17 Series, Руководство пользователя, Страница: 10 / 52

10
If... Try...
there is no camera picture Verify that the power supply adaptor for the
camera(s) is plugged in.
the picture quality is poor Clean the camera lens.
a white image appears at night The camera’s infra-red LED shines due to the
invisible light that reflects off surfaces such as
glass, causing white light. Place the camera
on the other side of windows with the lens side
flush against the surface to improve the night
vision, or place the camera in a well-lit area.
set up the Monitor
1. Remove the protective plastic from the monitor screen.
2. Flip out the stand on the back of the monitor and extend the antenna.
3. Connect an AC adaptor to the power input on the side of the monitor.
4. Connect the other end of the adaptor to a 240 volt AC (standard indoor) power
outlet.
5. Press and hold the
PoWeR
button on the top of the monitor for 1 - 2 seconds to
power it up.
6. The monitor displays the Uniden title screen and then displays the LIVE view.
7. After the system powers on, adjust the camera viewing position if needed.
Pairing Accessory Cameras to the Monitor
The cameras that come with your G17xx Series are paired to your monitor at the
factory. To pair the camera to the monitor, follow the steps below.
1. Press
M and access the main menu. Then select CAmerA Setup and press
M
.
Scroll to the camera number you want to assign to the new camera. Press
M
.
2. Press
CH+
to scroll to the pairing option. Press
M
to pair the camera.
3. Within 30 seconds, press the
PAIRInG
button on the camera’s power cord.
Pairing Button