unicraft PG-I 12 SR, Инструкция по эксплуатации

Страница: 17 / 66

Operation
PG-I Series | Version 1.03 17
Fig. 20: Venting tank cap
Step 3: Turn the knob for the fuel tap to "ON.
Fig. 21: Open fuel tap
Step 4: Turn the motor switch to the ON position.
Fig. 22: Operate motor switch
Step 5: Turn the knob for the fuel tap to "ON".
Step 6: When using the generators for the first time, after
refuelling with petrol, press the pump button 6
times.
Step 7: When the engine is cold: push the choke lever to
the "CHOKE" position.
Fig. 23: Actuate choke
Step 8: Slowly pull the pull starter until resistance is felt.
Then jerk the pull starter.
Fig. 24: Pullstarter
Step 9: Warm up the engine until it runs smoothly and
smoothly.
Step 10: Push the choke lever back to the "RUN" posi-
tion.
Fig. 25: Choke and run position
Engine
Switch