unicraft PG-I 12 SR, Инструкция по эксплуатации

Страница: 21 / 66

Care, maintenance and repair
PG-I Series | Version 1.03 21
10.3Table of the consumer capacity
The values given in the table are rough guide values.
The exact current consumption of the equipment and
consumers connected to the generator must be accura-
tely determined. To determine the exact values of the
consumers to be connected to the generator, refer to the
nameplates or consumer manuals.
11 Care, maintenance and repair
11.1Care by cleaning
The generator must always be kept in a clean condition.
All plastic parts and painted surfaces should be cleaned
with a soft, damp cloth and a little neutral cleaner.
Remove excess grease or leaked oil with a dry and lint-
free cloth.
Always keep the cooling fins clean and free.
Device Power
(W) Initial power
(W)
Light bulb 100 100
Refrigerator / Freezer 1200 2400
Sump pump 600 1800
Water pump 1HP 2000 4000
Water heater 4000
AM/FM - Radio 300
Garage door opener 500 600
Air conditioner 12000
BTU 1700 2500
Fan 300 600
Microwave 1000
Electric range
(1 Element) 1500
Coffee maker 1500
Washer 1200 3600
CD/DVD - Player 100
Stereo receiver 450
27” Television 500
PC 15” Monitor 800
Belt sanders 1000 2000
Circular saw 1500 4500
Compressor 1,5HP 1000 3000
Hand drill 1000 2000
Paint sprayer 600 1200
Table saw 2000 6000
ATTENTION!
Before operating electrical equipment through the
generator, the voltage and frequency requirements
must be clarified. If the equipment is not manufactu-
red to operate /- 10% voltage tolerance and
+/-3 Hz frequency tolerance relative to rated data, it
may be damaged.
ATTENTION!
- All cleaning, care, maintenance and repair work
may only be carried out with the generator switched
off.
- Always disconnect the spark plug connector from
the spark plug.
- No power consumer may be connected to the gene-
rator.
- It must be waited until the hot parts have cooled
down.
- Never clean the machine with a water jet or flam-
mable products!
- Before putting the generator back into operation,
make sure that it is completely dry.
NOTE!
The warranty does not cover parts of the generator
that have been misused or negligently handled by
the operator. For full warranty coverage, the opera-
tor must operate the generator as described in the
manual.
Regular adjustments must be made to ensure pro-
per operation of the generator. Follow the instructi-
ons in the "Maintenance schedule".
DANGER!
Never use strong cleaning agents to clean of the pla-
stic parts or painted surfaces. The surface may be
loosened and consequential damage may occur.
Use protective gloves!