manualshive.com logo in svg

Uni-Trend UT4000 Series, Руководство пользователя

Поделиться
Скачать
Uni-Trend UT4000 Series Скачать руководство пользователя страница 4

 

 

 

UNI-T

®

 

UT4000 User Manual 

 
If this product is sold or assigned by the original purchaser to a third party within three 
years of purchase, the new owner should note that warranty is available for a period of 
three years from the day the original purchaser acquired the product from Uni-T or an 
authorized dealer. The probe, other accessories and fuses are not covered by warranty. 
 
If any genuine defect is found during the valid warranty period, Uni-T has the option to 
repair the defective product without any charge for parts or labor, or replace it with 
another product (to be decided by Uni-T). For warranty purposes, Uni-T may use parts, 
modules and replacement products that are brand new or repaired to a good-as-new 
standard. All old parts, modules and products that are removed during replacement 
become properties of Uni-T. 
 
In this User Manual, “customer” means an individual or entity vested with the rights 
hereunder. To enjoy the warranty service, the “customer” must report any defect to Uni-T 
during the valid warranty period and make appropriate arrangement to allow servicing. 
The customer should pack the defective product in a container and deliver it to a 
maintenance centre specified by Uni-T. The customer should also prepay all freight cost 
and provide a copy of the original sales receipt issued to the original purchaser. If the 
product is to be delivered to an address within the country where the maintenance centre 
operates, Uni-T shall pay the cost of returning the product to the customer. If the product 
is to be delivered any other destination, all freight, custom duty, tax and other costs will 
be paid by the customer. 
 
This warranty does not apply to any defect, malfunction or damage caused by accident, 
normal wear and tear of mechanical parts, any form of application other than the stated 
ones, improper use, improper maintenance or poor maintenance. Under the warranty 
terms and conditions, Uni-T has no obligation to provide the following services : 
a)  Repairing any damage arising from installation, repair or maintenance carried out by 

a non Uni-T service representative; 

b)  Repairing any damage arising from improper use or connection to incompatible 

equipment; 

c)  Repairing any damage or malfunction arising from using a power source not 

provided by Uni-T; 

d)  Servicing a product that has been modified or integrated with other products (such 

modification or integration makes repair more time consuming and difficult). 

 
This warranty is made available to this product specifically and supercedes all other 
previous warranties, whether express or implied. Uni-T and its dealers will not make any 
implied guarantee on the salability or suitability of this product for any specific purpose. 
In the event of breach of warranty terms and conditions, repair or replacement of 
defective product shall be the only and all remedial measure offered by Uni-T. 
Notwithstanding any prior notification of potential damage that is indirect, special, 
consequential or inevitable, Uni-T and its dealers shall bear no liability for any such 
damage.  

Содержание UT4000 Series



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды