Tel: 888-990-7469
Tel: 888-990-7469
2
3
Uni-P H20 200C DEHUMIDIFIER
Installation, Operation & Service Instructions
Uni-P H20 200C DEHUMIDIFIER
Installation, Operation & Service Instructions
The design of the dehumidifier is suitable for indoors space that is protected from any forms
of flooding or rain.
For ease of testing and operation, it may be helpful to put the test switch and indicator
lights in
a convenient location.
Your dehumidifier should only be repaired by a qualified technician.
Do not insert objects or your fingers into the inlet or discharge.
Do not use water to clean the exterior of the dehumidifier. To clean unit, unplug from
power, then
use a damp cloth to wipe the exterior.
Do not stand on dehumidifier or place objects on it.
Unless otherwise noted, all maintenance should be done with the unit power off.
It is important to install the dehumidifier in a room that has enough space.This is to allow you
to access the side and/or back panels easily for service and maintenance purposes.
Be sure to follow your GFCI maintenance instructions.you will typically need to test
of the trip circuit monthly.
the operation
sales@unipdry
.
com
4.Warranty Registration
Prior to installation of the unit,write down the serial number and date of purchase. You will need
this information if you need assistance in the future. The data label on the side of your unit has
the necessary information.
Model Number: Uni-P H20 200C
Serial Number:
Date of Purchase:
For additional questions concerning your dehumidifier:
Contact your installing contractor
Contact US:
5.Parts Included
The Uni-P H2O 200CC Leveling Feet.
The Uni-P H2O 200CC Installation Instructions.
The Uni-P H2O 200CC Condensing Unit.
The Uni-P H2O 200CC Dehumidifier.
6.Specifcations
@
80°F/60% RH
Dimensions
:
Width
:
Height
:
Length
:
Weight
:
20
.
25
"
21
.
75
"
38
"
109 lbs
DEHUMIDIFIER
Capacity@80
℉/
60
%
RH
:
200 Pints Per Day
Airflow @ 0.0” SP
300 CFM
Operating Temp. Range
33-105°F
Operating Relative
Humidity Range:
36%-90%
COP:
2.8 L/kWh
Refrigerant:
R410A
7.6 Amps
115V/60Hz
/Single Phase
Amperage Usage:
Power Supply:
Outlet Requirement:
15 Amp,
3 Prong, GFCI
Sound Level:
60 dBa
ETL Listed:
YES
CONDENSER
Current Draw
9
.
7 Amps
Minimum Circuit
Ampacity:
Refrigerant:
R410A
40°F Min,
115°F Max
115V/60Hz
/Single Phase
Operating Range:
Power Supply:
Dimensions
:
Width
:
Height
:
Length
:
Weight
:
20
.
25
"
21
.
75
"
38
"
109 lbs
Power Cord:
Hard-Wired
20
Amps
Maximum Fuse
/ Breaker:
20
Amps
