Ulvac RFP-N Скачать руководство пользователя страница 9

Страница: 9 / 107

RF POWER SUPPLY and MATCHINGBOX

1. For Safe Operation

1. For Safe Operation

1-1. Precautions when handling the system

In order to safely use the system, this chapter describes the precautions, locations of warning labels,

and contact information for safe operation.

Danger

The voltage generated by this RF Generator is sufficient enough to pose a danger

to human life. The utmost care must be taken when handling the system. If a person

accidentally comes into contact with this voltage, it will lead to a serious accident.

Take great care not to come into contact with high voltages. DANGER: Never

energize the RF Generator with the cover removed. Do not open any covers other

than those specified in this instruction manual.

Danger

In order to prevent electric shock, always ground the cases of this equipment and

ground the wiring before energizing the system. In order to prevent electric shock

from ground leakage, do not use the system in environments where there is a

possibility of condensation. DANGER: Risk of electric shock and accidents from

ground leakage if liquids leak into the interior of the equipment.

Danger

The RF generator and matching box handle high voltages internally. When

performing maintenance on the interior of the equipment, always shut off the primary

side breaker for the power supply used and confirm that the AC power supply has

been shut off, then wait three minutes or more before opening the specified cover.

Interior maintenance work must be done by a technician specified by ULVAC or

under the direction of such a person. For maintenance work where the interior may be

opened, see "Chapter 7 Maintenance".

Содержание RFP-N












































































































Результаты поиска

Содержание RFP-N

Отзывы:

Похожие инструкции для RFP-N

Бренды по названию

Популярные бренды

Ulvac RFP-N, Инструкция по эксплуатации

Результаты поиска

Содержание RFP-N

Отзывы:

Похожие инструкции для RFP-N

Бренды по названию

Популярные бренды