Ulvac GHD-031A, Инструкция по эксплуатации

Страница: 24 / 45

－14－
the shape of the power cable.
The unplug-preventive hardware allows you to secure the power cable so that
the motor may not accidentally have it unplugged.
For a procedure for installing the unplug-preventive hardware, refer to “b-2
How to Install Unplug-preventive Hardware.”
b-2) How to install unplug-preventive hardware
Install the unplug-preventive hardware in accordance with the procedure as
follows
① Let one end of the unplug-preventive
hardware Catch the hole to the side
of the inlet in the interior.
② While pushing the unplug-preventive
hardware at the other end, let it
catch the hole to the side of the
inlet in the interior.
③ Raise the unplug-preventive hardware.
④ Insert the power cable firmly enough.
⑤ Lower the unplug-preventive hardware
and cable.
Now, the unplug-preventive hardware is completely installed.
Whenever you may operate the vacuum pump with the power cable, does not fail to secure
it with the unplug-preventive hardware.
②
①
③
⑤
④
Warning