background image

 

 

Usage Status Check Sheet (for use in Instruction Manual) 

 

* For the purpose of safety control of repair personnel, fill in within the heavy line frame and attach the sheet to 
the item of which repair is requested.   
* In case this sheet were not attached or filled in, your request of repair and service may not be accepted.   
* In accordance with the Private Information Protection Law, the provided information will be used only for 

determining the cause of failure and whether detoxifying washing should be conducted. It will never be provided 
to any third person.   

 
Model Name: _______________       Manufacturer’s Serial No.:________________ 
1. Inhaled Gas      * Please be sure to fill in.   
(1) Whether there is harmful effect on human bodies        Yes      No 

 

(Sing your name 

below.) 
(2) Whether there is unusual smell                  Yes    No 
(3) Type and Name of Gas:______________________________ 
      * Industrial Safety and Health Law designates particular substances as the materials to 
be notified.   
 
2. Usage Status 
Operation Method: Approx. (    ) hours per day,    (    ) years and (    ) months 

 Continuous Operation    

 

Intermittent Operation   

Usage:__________________________________ 
 
3. Failure Status   

Unusual Noise               

Abnormal Pressure 

 

Abnormal Actuation   

Oil Leakage      Other 

Symptoms:_______________________________ 

 

4. Detail of Request     

Repair (Overhaul)     

Regular Checks 

 
5. Others:_____________________________ 
 
Company Name:                    Personnel in charge:                                      
Address:                                                                                                                                                                       
Tel:                                            Fax:                                            E-mail:                                                               

 

Agent Name;                        Personnel in charge:                                   

 

Address:                                                                                                                                                                       
Tel:                                            Fax:                                                                                                                           
* In case you do not have any direct transaction with us, please be sure to fill in the agent 
name. 
 
6. Confirmation   
The gas and substance used in this pump or unit is harmless to human bodies, or it is not 
contaminated by any substance harmful to human bodies.   
 
Signed

                                 

(seal)                  Date:                                               

 

* In order to avoid a trouble during transportation, please evacuate oil from any oil pump before shipping.

             

 

* You are requested to ship the package to our Service Division (CS Center). (See the attached list of addresses.)

 

Содержание G-5DA









































Отзывы: