background image

 
 

 

 

15 

7. In Conclusion 

Please contact the manufacturer’s sales division if you have any questions. 

 

 

Warranty 

 

(1) The warranty for this pump (this equipment) extends for a period of one year from the date of shipment. 

(2) Any malfunctions or defects which occur under normal usage conditions during the warranty period will be 

repaired free of charge. 

Note,  the  warranty  stated  here  is  an  individual  warranty  covering  the  pump.  In  addition,  the  scope  of  the 

warranty coverage concerning repairs is limited to the repair and/or replacement of parts. 

Normal usage conditions refer to the following: 

a) Ambient temperature and humidity during operation: 0 - 40°C, below 85% RH 

b) Operation in accordance with the user manual 

(3) Repair fees will incur during the warranty period for the following cases: 

a) Malfunctions due to a natural disaster or fire. 

b)  Malfunctions  caused  by  special  atmospheric  conditions,  such  as  salt  damage,  inflammable  gas, 

corrosive gas, radiation or pollution. 

c) Malfunctions caused by usage conditions that differ from those stated in the user manual (performance 

specifications, maintenance and inspection, etc.). 

d) Malfunctions caused by modifications or repairs carried out by a party other than the manufacturer, or 

by a service company not approved by the manufacturer. 

e) Malfunctions caused by noise (electric disturbance). 

f) Malfunctions that occur when not using a rated power supply. 

g)  Malfunctions  that  occur  when  there  is  an  abnormal  rise  in  internal  pressure  due  to  the  pump  exhaust 

outlet being blocked during operation, etc. 

h) Malfunctions that occur, when the pump is damaged as a result of being dropped or falling, etc. 

i)  Malfunctions  which  are  determined  by  the  manufacturer’s  technical  personnel  to  be  caused  by 

conditions that do not comply with the usage conditions for this vacuum pump. 

j) Malfunctions due to the replacement of consumables.         

(4) Disclaimer 

a)  We shall not  be liable  for any  malfunctions of  our  products caused by  the customer, regardless  if the 

malfunction does not fall within the warranty period, nor shall we be liable for any loss of opportunity 

for  the  customer’s  clients  or  for  compensation  for  any  damages  to  other  products,  labor  costs, 

production loss, transportation expenses and other related work.   

b) We shall not be liable for any claims and patent infringements, including secondary damages, filed a 

claim by a third party against the customer. 

 

 

Содержание DTC-22




























Отзывы: