11
(13)
The pump head spacer is inserted between the pump head and the casing as shown in
Photo 14.
Note: Insert the pump head spacer in the same place as the place that has adhered.
Photo14
(14)
The pump head is fixed with hex socket head bolts (M6X25).
Note: Ensure that the hex socket head bolts (M6x25) are tightened in diagonally
opposite pairs to a torque of 11Nm.
Note: Confirm the thing that the pump head spacer has been inserted in the interior.
(Photo 15 and 16)
Photo 15 Photo 16
(15) Position the top panel, and fix it in place with the truss head screws (M4x10).
(16) Lay in the pump on its side, and fix the front panel in place with the truss head screws
(M4x10).
(17) Stand the pump upright, and fit the inlet and outlet pipes.
1) -2. DTC-22K
* Replace t
he diaphragm as shown in ‘DTC-22, (4)~(14)’.
It puts it in the interior.
○
Ｇｏｏｄ
×
Ｂａｄ
It is not to the interior.
It is to the interior.
