
DC Pulse Power Supply
【
DC-5-P/DC-10-P
】
4
DESCRIPTION OF FUNCTIONS
26
4-1-2. DC power back panel
①
②
③
④
⑤
⑤
⑨
⑧
⑦
⑩
⑪ ⑫ ⑬
⑥
⑭
①
②
③
④
⑤
⑤
⑨
⑧
⑦
⑩
⑪ ⑫ ⑬
⑥
⑭
Figure 4-2: Back of Power Unit (Upper
:
DC-5-P
Lower
:
DC-10-P)
Table 4-2: Name and function on back of power unit
No.
Name
Shape
Function
①
AC
INPUT
Connector
Connector for AC input
②
Name plate
-
Indication of Model, S/N, etc.
③
DC
OUTPUT
Connector
Connector for DC output
④
USER IO PORT
D-sub 37-pin connector
Connector for external control
⑤
Ground terminal
M5 stud
Enclosure ground terminal* 1
⑥
Breaker
Circuit breaker
The AC input is supplied to the power supply or shut off.
Upper: supply; Lower: shut off
⑦
M/S configuration
switch *2
Rotary switch
Before Master/Slave operation, make the settings.
⑧
M/S connector (female)
D-sub 15-pin connector
Before Master/Slave operation, make connections.
⑨
M/S connector (male)
D-sub 15-pin connector
Before Master/Slave operation, make connections.
⑩
SERIAL communication
port
D-sub 9-pin connector
Use in the RS232C/RS485 communication mode.
⑪
P configuration switch*3 Slide switch
This is not used. The factory default setting is the N side.
⑫
USB connector*3
USB
This is not used.
⑬
Mode configuration
switch*3
Piano switch
This is not used. The factory default settings are all in the
upward direction (on the OFF side).
⑭
Optical synchronization
connector
Optical connector
Make a connection for checking the pulse synchronization
operation.
*1 When using an optional input cable, the connection of an earth wire to the terminal is not necessary. Install the unit with the
earth wire on the input cable side.
*2: The respective switch position depends on the number of connected M/S units. See Section 3-3-4.
*3: This is used for maintenance. Do not make any
settings
. If the setup content is changed, the power supply unit cannot be
started up normally.
If any changes are made accidentally, reset to the factory default settings.
Содержание DC-5-P
Страница 81: ...DC Puse Power Supply DC 5 P DC 10 P 8 APPENDIX 69 Figure 8 2 External view of DC 10 P...
Страница 105: ......