4-10
Edition March 1995
4 - Loading
■
Preparing the Bulk Load Supply Cassette
1. In a totally dark room, or safe-lit room (using dark green safelight
filters), remove the material from its wrapping.
2. Open the box using the slide latches, and remove the closure lid.
Remove the plastic end bells and insert each in to one end of the
film roll.
1
There are two end bells supplied with the cassette. One for 1-1/8"
cores (generally for photo paper) and one for 2" cores (film).
3. Place the roll into the box such that the tail of the material exits at
the velvet exit (emulsion side down) and so that the notched side of
the end bells face out of the top of the box. Make certain that the
roll can rotate freely.
4. Install the closure lid and close the slide latches. Check that the
material does not bind in the exit slot.
1
The maximum capacity of the bulk load cassette is 250 feet (75
meters).
3000/4000 UM : Chapter 4 (Loading) Page 10 Wednesday, September 4, 1996 8:28 AM
